3.6mm 4×8 Mesh Zeolite Molecular Sieve 5A

3.6mm 4×8 Mesh Zeolite Molecular Sieve 5A
Product introduction
 
The 5A molecular sieve has a pore size of 5A (1A=0.1 nanometers) and is generally called calcium molecular sieve. It can adsorb any molecule smaller than this pore size. It is mainly used in iso-hydrocarbon separation, pressure swing adsorption separation and co-adsorption of water and carbon dioxide. Based on the industrial application characteristics of 5A molecular sieve, our 5A molecular sieve has high selective adsorption and adsorption speed It is fast and especially suitable for pressure swing adsorption. It can be adapted to various sizes of pressure swing adsorption devices for oxygen, hydrogen, carbon dioxide and other gas. It is a fine product in the pressure swing adsorption industry. In addition to the effects of 3A and 4A molecular sieves, it can also adsorb C3-C4 normal alkanes, ethyl chloride, ethyl bromide, butanol, etc. It can be widely used in the oxygen production industry to absorb moisture, carbon dioxide and some organic gases.
Molecular formula: 0.70CaO·0.30Na2O·Al2O3·2.0SiO2·4.5H2O
 
5A molecular sieve technical Index:

 
 
Scope of application
This kind of sieve absorbs substances at the molecular level. It can absorb up to 22% of its body weight. The adsorption principle is similar to that of chromatography, except that the molecular composition of the substance is not changed.
1. Natural gas drying, desulfurization, and carbon dioxide removal;
2. Separation of nitrogen and oxygen, separation of nitrogen and hydrogen to produce oxygen, nitrogen and hydrogen;
3. Petroleum dewaxing, separation of normal hydrocarbons from branched hydrocarbons and cyclic hydrocarbons.
 
Store
Storage: Room temperature, relative humidity not more than 90%; not directly exposed to the air; avoid water, acid and alkali.
Packing: cardboard drum or carton packaging.
Note: Avoid direct exposure of molecular sieve to air.
 
Product Pictures

 
 
Regeneration
1. Removal of water: it depends on the pressure, temperature and water content of the regeneration gas. Under normal circumstances, the dry gas at 200~350℃ will pass through the molecular sieve bed for 3~4 hours under the pressure of 0.3~0.5kg/cm to bring the outlet temperature to 110~180℃ and cool.
2. Removal of organic matter: replace organic matter with water vapor, and then remove water.
 
 
Package
Packed in iron drums, (according to the product model) net weight 125kg, 135kg, 140kg, or according to user needs.
 
Factory information
Shanghai Xuefeng Molecular Sieve Co., Ltd. adopts the most advanced and fully automated assembly line molecular sieve production technology in China, and has positions for dosing, kneading, extrusion, drying, roasting and packaging. The main equipment includes pelletizing machine, hardening cylinder, kneader, extruder, belt dryer, rotary roasting furnace, vibrating screen, scale and other ancillary facilities. The production process parameters are all automatically controlled, and there is no paper recorder attached. , The results of the process parameters are comprehensively recorded, and at the same time, the operators of each position shall manually record the parameters every hour to ensure the traceability of the operation process. At the same time, the company pays attention to the inspection of intermediate products, and has set up sampling points for intermediate products in the ingredients, extrusion molding, and drying positions to ensure that the intermediate products meet the specified quality requirements.