Deep Dehydration 4.8mm 5A Regenerating Molecular Sieves

 Deep Dehydration 4.8mm 5A Regenerating Molecular Sieves

Product introduction

Mol sieve 5a is an alkali metal aluminosilicate; Molecular sieve 5A is the calcium form of the type A crystal structure. mol sieve 5a adsorbs molecules with effective diameters small than 5 angstrom (0.5nm).

Mol sieve 5a is an alkali metal aluminosilicate with an effective pore opening of 5 angstroms and is the calcium-exchanged form of the type A zeolite. The strong ionic forces of the divalent calcium cation make 5A an excellent choice for removing carbon dioxide, carbon monoxide, alcohols and other oxygenates, hydrogen sulfide, methyl and ethyl mercaptans, and other polar molecules. This product is also effective for the bulk separation of normal and iso-paraffin hydrocarbons. This type of molecular sieve has a high rate of adsorption and desorption, a higher rate of contamination resistance and a high crush strength

Mol sieve 5a is an effective absorbing solution for various applications. This most reliable desiccant can be used for:

Separating process of normal paraffin

Removing moisture and hydrocarbons from refrigerants

Drying of natural gas

Removing carbon dioxide from cracked gas and natural gas

Drying and purifying PSA oxygen

Drying and Separation of aromatics

Liquefied petroleum gas sweetening

Refinement of ethanol by drying moisture and carbon dioxide

Pressure Swing Adsorption process of oxygen and hydrogen

5A molecular sieve technical Index:

 
 
Product Pictures

 
 
Product Performance
 
Molecular sieve has strong moisture absorption capacity and is used for gas purification treatment. Avoid direct exposure to the air during storage. Molecular sieves that have been stored for a long time and have absorbed moisture should be regenerated before use. Molecular sieve avoids oil and liquid water. Try to avoid contact with oil and liquid water when in use. The gases to be dried in industrial production include air, hydrogen, oxygen, nitrogen, argon, etc. Two adsorption dryers are used in parallel, one works, and the other can be regenerated. Alternate work and regeneration to ensure continuous operation of the equipment. The dryer works at 8-12°C, and regenerates when heated to 350°C. Different specifications of molecular sieve have slightly different regeneration temperatures. Molecular sieves have a good catalytic effect on certain organic gas phase reactions.
 
Product Features
1. Adsorption is selective.
⑴ Choose the adsorption according to the different molecular diameter.
⑵ Select the adsorption according to the polarity of the molecule.
⑶ Selective adsorption according to the degree of molecular unsaturation.
⑷ Select adsorption according to different boiling points.
2. It has low concentration and high adsorption characteristics at higher temperature.
3. Cation exchange characteristics.
4. Catalytic properties.
⑴ The heterogeneous catalytic reaction is carried out on the surface of the catalyst. When the molecular sieve is used as a catalyst or carrier, the catalytic reaction is to catalyze the substances entering the micropores of the molecular sieve.
⑵ Only produce products whose molecules are smaller than the pores of the molecular sieve.
⑶ Because of the large surface area, it has high activity.
⑷ Strong resistance to poisoning and high thermal stability.
⑸ When used as a carrier, the metal catalyst can be evenly distributed on the inner surface of the molecular sieve, so it is easy to prepare a catalyst with good repeatability.
 
 
Factory information
Shanghai Xuefeng Molecular Sieve Co., Ltd. adopts the most advanced and fully automated assembly line molecular sieve production technology in China, and has positions for dosing, kneading, extrusion, drying, roasting and packaging. The main equipment includes pelletizing machine, hardening cylinder, kneader, extruder, belt dryer, rotary roasting furnace, vibrating screen, scale and other ancillary facilities. The production process parameters are all automatically controlled, and there is no paper recorder attached. , The results of the process parameters are comprehensively recorded, and at the same time, the operators of each position shall manually record the parameters every hour to ensure the traceability of the operation process. At the same time, the company pays attention to the inspection of intermediate products, and has set up sampling points for intermediate products in the ingredients, extrusion molding, and drying positions to ensure that the intermediate products meet the specified quality requirements.