Place of Origin: | China |
Certification: | ISO9001:2015 |
Model Number: | 4×8 mesh |
Minimum Order Quantity: | Negotiation |
---|---|
Price: | Negotiable |
Packaging Details: | 25 kg / kraft paper bag, 100 kg / large bag 150 kg / sealed iron drum |
Delivery Time: | Negotiable |
Payment Terms: | L/C;T/T |
Supply Ability: | 6000 ton/year |
Product Name: | 4×8 Mesh 13X Molecular Sieve Desiccant | Classification: | Chemical Auxiliary Agent |
---|---|---|---|
CAS: | 1318-02-1 | Purity: | 99% |
Usage: | Petroleum Additives, Water Treatment Chemicals | Model Number: | 13X |
MF: | Na2O, Al2O3, SiO2 | Advantage: | Strong Adsorption Capacity, High Strength |
Diameter: | 3.6-4.8mm | Wear Rate(%): | ≤0.25 |
High Light: | 4*8 mesh molecular sieve 13x,Molecular Sieve 13x For Gas Purification,4*8 mesh 13x zeolite |
4*8 Mesh Molecular Sieve 13x For Gas Purification
Product introduction
Molecular Sieve 13X is the sodium form of the type X crystal and has a much larger pore opening than the type A crystals. It will adsorb molecules with a kinetic diameter of less than 9 Angstrom (0.9 nm) and exclude those larger. It also has the highest theoretical capacity of the common adsorbents and very good mass transfer rates. It can remove impurities too large to fit into a type A crystal and is commonly used to separate nitrogen from oxygen.
Molecular formula: Na2O.Al2O3 .2.45SiO2.6.OH2O
13X molecular sieve technical Index:
Index Item | Unit | Technical index | |||
Shape | APG1/16" | APG1/8" | PG1/16" | SAS-150 | |
Diameter | mm | 1.5-2.0 | 3.0-3.5 | 1.2-2.0 | 3.6-4.8 |
Size ratio up to grade | % | ≥98 | ≥98 | ≥98 | ≥98 |
Bulk density | g/ml | ≥0.63 | ≥0.63 | ≥0.63 | ≤0.65 |
Wear rate | % | ≤0.20 | ≤0.25 | ≤0.20 | ≤0.25 |
Crushing strength | N | ≥30 | ≥65 | ≥33 | ≥90 |
Static water adsorption | % | ≥25 | ≥25 | ≥25 | ≥25 |
Carbon dioxide adsorption | % | ≥17.5 | ≥17.3 | ≥17.5 | |
Package water content | % | ≤1.5 | ≤1.5 | ≤1.5 | ≤1.5 |
Index Item | Unit | Technical index | |||
Shape | APG4×8 mesh | APG6×8 mesh | APG8×12 mesh | hp8×12 mesh | |
Diameter | mm | 3.6-4.8 | 2.4-3.5 | 1.7-2.4 | 1.7-2.4 |
Size ratio up to grade | % | ≥98 | ≥98 | ≥98 | ≥98 |
Bulk density | g/ml | ≥0.64 | ≥0.64 | ≥0.65 | ≤0.65 |
Wear rate | % | ≤0.20 | ≤0.25 | ≤0.20 | ≤0.25 |
Crushing strength | N | ≥85 | ≥50 | ≥26 | ≥24 |
Static water adsorption | % | ≥ | ≥25 | ≥25 | ≥25 |
Carbon dioxide adsorption | % | ≥18 | ≥18 | ≥18 | ≥19.3 |
Package water content | % | ≤1.5 | ≤1.5 | ≤1.5 | ≤1.5 |
Typical Application
1. Water, dioxide, hydrocarbons removal
2. General industrial gases drying
3. Gas purification in air separation process
4. Natural gas, liquefied petroleum, liquid hydrocarbons(propane, botane…) dehydration
5. Sulfur dioxide and mercaptan removal
6. General gas (such as compressed air, permanent gas) deeply drying
7. Ammonia synthesis gas drying and purification
8. Aerosol propellant desulfurization and deodorization
9. Carbon dioxide removal from cracked
Store
Room temperature, relative humidity not greater than 90% indoors: avoid water, acid, alkali, isolate air, and store in airtight.
Regeneration
Removal of water: dry gas such as nitrogen, air, hydrogen, saturated hydrocarbon, etc. can be heated to 150-320°C and pass into the molecular sieve bed under 0.3-0.5kg/m2 pressure for 3-4 hours, and then to the adsorber Pass in dry cold air for about 2-3 hours, isolate the air and cool to room temperature.
Removal of organic matter: the adsorbate can be replaced from the molecular sieve with water vapor, and then heated to (1). The regeneration can also be regenerated by superheated steam or inert gas at 200-350℃. Exposure to gases that produce explosive mixtures).
The degassed substances can be regenerated by the decompression removal method.
Package
Packed in iron drums, (according to the product model) net weight 125kg, 135kg, 140kg, or according to user needs.
Product Pictures
Factory information
Shanghai Xuefeng Molecular Sieve Co., Ltd. adopts the most advanced and fully automated assembly line molecular sieve production technology in China, and has positions for dosing, kneading, extrusion, drying, roasting and packaging. The main equipment includes pelletizing machine, hardening cylinder, kneader, extruder, belt dryer, rotary roasting furnace, vibrating screen, scale and other ancillary facilities. The production process parameters are all automatically controlled, and there is no paper recorder attached. , The results of the process parameters are comprehensively recorded, and at the same time, the operators of each position shall manually record the parameters every hour to ensure the traceability of the operation process. At the same time, the company pays attention to the inspection of intermediate products, and has set up sampling points for intermediate products in the ingredients, extrusion molding, and drying positions to ensure that the intermediate products meet the specified quality requirements.
Contact Person: Qiao
Tel: +8615038006622
Strong Adsorption DG1/16" 4A Molecular Sieve Desiccant
CAS 1318-02-1 2.5mm 3A Molecular Sieve Air Dryer
2.5mm 26N 13X Molecular Sieve Adsorbent