CAS 1318-02-1 4.8mm 4A Molecular Sieve Adsorbent

CAS 1318-02-1 4.8mm 4A Molecular Sieve Adsorbent

Product introduction

Molecular Sieve 4A is an alkali silicate, it is the sodium form of the type A crystal structure, mainly absorbing water, NH3,H2S,SO2,CO2, C2H5OH,C2H6,C2H4,doesn’t adsorb any molecular larger than 4A (including propane).

4a molecular sieve adsorbent is used for gas, liquid of dryness and adsorption water, ammonia gas, hydrogen sulfide, carbon dioxide, sulphur dioxide, ethanol, ethane,ethylene, propylene etc.4A molecular sieve cann’t adsorb propane and the molecular which are bigger than propane molecular.4A molecular sieve is also used for dryness of impurity gas in oil, oil & Natural gas and dehydration of ethanol.

4A molecular sieve technical Index:

Scope of application

a) Drying and removing of CO2 from natural gas, LPG, air, inert and atmospheric gases, etc.
b) Removal of hydrocarbons, ammonia and methanol from gas streams (ammonia syn gas treating)
c) Special types are used in the air break units of buses, trucks and locomotives.
d) Packed in small bags, it may be used simply as a packaging desiccant

Product Pictures

Product Performance

Molecular sieve has strong moisture absorption capacity and is used for gas purification treatment. Avoid direct exposure to the air during storage. Molecular sieves that have been stored for a long time and have absorbed moisture should be regenerated before use. Molecular sieve avoids oil and liquid water. Try to avoid contact with oil and liquid water when in use. The gases to be dried in industrial production include air, hydrogen, oxygen, nitrogen, argon, etc. Two adsorption dryers are used in parallel, one works, and the other can be regenerated. Alternate work and regeneration to ensure continuous operation of the equipment. The dryer works at 8-12°C, and regenerates when heated to 350°C. Different specifications of molecular sieve have slightly different regeneration temperatures. Molecular sieves have a good catalytic effect on certain organic gas phase reactions.

Product Features

1. Adsorption is selective.

⑴ Choose the adsorption according to the different molecular diameter.

⑵ Select the adsorption according to the polarity of the molecule.

⑶ Selective adsorption according to the degree of molecular unsaturation.

⑷ Select adsorption according to different boiling points.

2. It has low concentration and high adsorption characteristics at higher temperature.

3. Cation exchange characteristics.

4. Catalytic properties.

⑴ The heterogeneous catalytic reaction is carried out on the surface of the catalyst. When the molecular sieve is used as a catalyst or carrier, the catalytic reaction is to catalyze the substances entering the micropores of the molecular sieve.

⑵ Only produce products whose molecules are smaller than the pores of the molecular sieve.

⑶ Because of the large surface area, it has high activity.

⑷ Strong resistance to poisoning and high thermal stability.

⑸ When used as a carrier, the metal catalyst can be evenly distributed on the inner surface of the molecular sieve, so it is easy to prepare a catalyst with good repeatability.

Factory information

Shanghai Xuefeng Molecular Sieve Co., Ltd. adopts the most advanced and fully automated assembly line molecular sieve production technology in China, and has positions for dosing, kneading, extrusion, drying, roasting and packaging. The main equipment includes pelletizing machine, hardening cylinder, kneader, extruder, belt dryer, rotary roasting furnace, vibrating screen, scale and other ancillary facilities. The production process parameters are all automatically controlled, and there is no paper recorder attached. , The results of the process parameters are comprehensively recorded, and at the same time, the operators of each position shall manually record the parameters every hour to ensure the traceability of the operation process. At the same time, the company pays attention to the inspection of intermediate products, and has set up sampling points for intermediate products in the ingredients, extrusion molding, and drying positions to ensure that the intermediate products meet the specified quality requirements.